SN74LV175ADBRE4 Overview
The package is in the form of 16-SSOP (0.209, 5.30mm Width). D flip flop is embedded in the Tape & Reel (TR) package. T flip flop uses Differentialas the output. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74LV series. There should be no greater frequency than 165MHzon its output. D latch consists of 1 elements. T flip flop consumes 20μA quiescent energy. Terminations are 16. The 74LV175 family contains this object. Power is supplied from a voltage of 2.5V volts. Input capacitance of this device is 1.4pF farads. A device of this type belongs to the family of LV/LV-A/LVX/H. There is an electronic part mounted in the way of Surface Mount. A total of 16pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. It is included in FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 5.5V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. The system runs on a power supply of 3.3V watts. Its output current of 12mAallows for maximum design flexibility. This input has 2lines in it.
SN74LV175ADBRE4 Features
Tape & Reel (TR) package
74LV series
16 pins
3.3V power supplies
SN74LV175ADBRE4 Applications
There are a lot of Texas Instruments SN74LV175ADBRE4 Flip Flops applications.
- Pattern generators
- Buffered Clock
- Common Clocks
- Digital electronics systems
- Asynchronous counter
- ESD performance
- Storage registers
- Set-reset capability
- Shift registers
- Computers
