FSA1256L8X Overview

Shipping overseas is convenient due to the electrical component's packing in 8-UFQFN. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~85°C TA extended. In total, there are 8 terminations. A electrical component with 2 channels is capable of high-quality output. When the electronic component is given a voltage of 2.7V, it should be turned on and run. Circuits based on SPST - NO switching are used to construct these analog switch ics. FSA1256 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 1.15Ohm. The datasheets for the 8 pins explain the functions. Multiplexer or Switches is a typical switch device. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. 1.65V is the lowest voltage the electrical component should receive. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. A digital multiplexer may suffer damage if voltage is applied above 500nA. This analog switch ic utilizes SEPARATE OUTPUT output. 300MHz-bandwidths can be used to transfer data between multiplexers. Resistivity from Drain to Source is 9.5Ohm for this electronic part.

FSA1256L8X Features

2 Channels
Switch Circuit: SPST - NO
Bandwidth: 300MHz
Drain-to-Source resistance: 9.5Ohm

FSA1256L8X Applications

There are a lot of ON Semiconductor FSA1256L8X Analog Switches & Multiplexers ICs applications.

• High speed data transmission line cards
• PCMCIA cards
• Central office
• Relay replacements
• High reliability control systems
• Battery-powered systems
• Microprocessor controlled systems
• PBX interfaces
• ATM
• Precision test equipment