FSA4157P6 Overview

Shipping overseas is convenient with the electronic component packed in 6-TSSOP, SC-88, SOT-363. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -40°C~85°C TA. A total of 6 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. Circuits based on SPDT switching are used to construct these analog switch ics. Try searching with FSA4157 if you're looking for variants. Analog switches have 1.15Ohm internal resistance. For functions related to 6 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Single supply type. There should be 1.65V voltage fed to the electrical part below 1.65V. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~5.5V. If you put voltage higher than 500nA on the digital multiplexer, damage may occur. A 300MHz-bandwidth can be used for data transfer. Drain to Source resistance is 750mOhm. The analogue multiplexer has 2 outputs.

FSA4157P6 Features

1 Channels
Switch Circuit: SPDT
Bandwidth: 300MHz
Drain-to-Source resistance: 750mOhm

FSA4157P6 Applications

There are a lot of ON Semiconductor FSA4157P6 Analog Switches & Multiplexers ICs applications.

• Cable Modem
• PDH Multiplexers
• Medical
• Modems
• SONET/SDH ADM
• E1 Multiplexer
• Industrial control systems
• Cross Connects
• Cell phones
• Cable Telephony – NIU, Set-Top Box, Home Side Box