I2811BF-08SR Overview

Tape & Reel (TR)-method packaging is used for clock ICs. As part of the 8-SOIC (0.154, 3.90mm Width) package, this clock generator is embedded. This clock generator ic can sustain NOT SPECIFIED degrees of temperature during reflowing. 8 terminations can be found in frequency synthesizer. This time clock generator should be voltaged at 3.3V. In this clock generator, CMOS, TTL is used as the input to the clock. It is possible to access the full performance of the electrical part by implementing 1 circuits. RF synthesizers based on this clock provide frequencies up to 40MHz maximum. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This RF synthesizer has CLOCK GENERATOR, OTHER uPs, uCs, and peripheral ICs. There are 3V~3.6V available for use with this clock PLL. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. CMOS, TTL logic levels are supported by this RF synthesizer. Microprocessor-specific clock PLL with 8 bits. This part number is related to its related electronic parts. There are 8 pins that are available on the clock PLL. The device is usually classified as a type of Clock Generators device. This frequency synthesizer features IT ALSO OPERATES AT 2.5 V to produce better clock signals. The thermal destruction of an element may result from an excess of supply current (higher than 24mA).

I2811BF-08SR Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V

I2811BF-08SR Applications

There are a lot of ON Semiconductor I2811BF-08SR Clock Generators applications.

• Coherent carrier tracking
• Modems
• Myriad digital applications
• Set-top boxes
• Wireless infrastructure
• Skew suppression
• Satellite navigation communication
• Digital switching systems
• Quenching?
• Clock recovery