KA75330ZTA Overview

There are 3 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Box (TB). For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 1 channels that can be found. There are TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. The supervisor is always powered by a 5.25V volt supply. Power ics operate at 1 supply voltages. The mount is attached to Through Hole. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. 3 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 300mV, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 15V volts in this IC power. Through Hole mounting is recommended. This range of temperature should be set for the supervisors: -25°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supervisor's supply current is specified to 500μA. To find similar IC managements from the manufacturer, you can always search by KA75330. The maximum supply temperature voltage supervisor can handle is 500μA.

KA75330ZTA Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 300mV
500μA operating supply current

KA75330ZTA Applications

There are a lot of ON Semiconductor KA75330ZTA Voltage Supervisors applications.

• Electric heating appliances
• Digitally controlled LDO regulators circuit
• Power distribution systems of infant care room
• Low voltage/high power - AI, GPU
• DC stabilized power supply module
• Unattended substation automation
• Electrical fire monitoring system
• Detection of phase loss
• Household appliances
• Data storage applications