MC100EP11DG Overview

The clock divider is available in 8-SOIC (0.154, 3.90mm Width) case. In case Tube, the cut smart buffer is available. There are 8 terminations in it. Using a supply voltage of 3.3V allows for high efficiency. As far as I can tell, it is mounted by Surface Mount. The electrical component has a classification of Fanout Buffer (Distribution). The temperature should be set to -40°C~85°C to ensure reliable performance. The clock switch should be able to be powered by a 3V~5.5V V source. It has been positioned in the way of Surface Mount. 8 pins are present on timeing clock. There is an output of ECL, PECL. It is operated by using 8 pins. This is a member of the MC100EP11 family. The cut smart buffer you are looking for is contained within Clock Drivers. The maximum supply voltage (Vsup) is set to 5.5V. The supply voltage (Vsup) should be maintained above 3V in order for the clock divider to operate normally. As a default, it is set to output 2 by default. There is a voltage supply of -3.0/-5.5V volts for powering it. It is a part of the 100EP series of electrical parts. When utilizing this gadget, NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V can also be obtained. It maintains excellent accuracy at a frequency of 3GHz. A maximum input voltage of 2.42V can be applied to it.

MC100EP11DG Features

8 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
at 3GHz frequency

MC100EP11DG Applications

There are a lot of ON Semiconductor MC100EP11DG Clock Buffers & Drivers applications.

• Big data
• Gigabit Ethernet (GbE)
• Clock signal duplication
• Clock signal format conversion
• OTN
• Mass storage system
• Information equipment
• Microserver
• High-end consumer electronics
• Data center