MC100EP131MNG Overview

The flip flop is packaged in 32-VFQFN Exposed Pad. D flip flop is embedded in the Tube package. T flip flop uses Differentialas the output. It is configured with a trigger that uses a value of Positive, Negative. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at a voltage of -3V~-5.5V. It is operating at a temperature of -40°C~85°C TA. D-Typedescribes this flip flop. This type of FPGA is a part of the 100EP series. It should not exceed 3GHzin its output frequency. A total of 1elements are present in it. As a result, it consumes 120mA quiescent current and is not affected by external forces. There are 32 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Members of the 100EP131family make up this object. The power source is powered by 3.3V. It is mounted in the way of Surface Mount. There are 32pins on it. This device has the clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. This flip flop is designed with 4 Bits. 5.5Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 3V. A reliable performance of this D flip flop makes it well suited for use in TRAY. A total of 4input lines have been provided. Additionally, there are NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V on the electronic flip flop that can be referred to.

MC100EP131MNG Features

Tube package
100EP series
32 pins
4 Bits

MC100EP131MNG Applications

There are a lot of ON Semiconductor MC100EP131MNG Flip Flops applications.

• Test & Measurement
• Balanced Propagation Delays
• Count Modes
• Functionally equivalent to the MC10/100EL29
• EMI reduction circuitry
• Set-reset capability
• Divide a clock signal by 2 or 4
• Pattern generators
• Computers
• Digital electronics systems