CD74HC112NSR Overview

The flip flop is packaged in 16-SOIC (0.209, 5.30mm Width). D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Differential. It is configured with the trigger Negative Edge. There is an electric part mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. A temperature of -55°C~125°C TAis used in the operation. It belongs to the type JK Typeof flip flops. In terms of FPGAs, it belongs to the 74HC series. It should not exceed 60MHzin terms of its output frequency. The number of terminations is 16. The 74HC112family includes it. Power is supplied from a voltage of 4.5V volts. A 10pFfarad input capacitance is provided by this T flip flop. Devices in the HC/UHfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. This device's clock edge trigger type is Negative Edge. This device has the base part number FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be above 2V. Despite its superior flexibility, it relies on 2 circuits to achieve it. As a result of its reliability, this D flip flop is ideally suited for TR. With an output current of 5.2mA, it is possible to design the device in any way you want. As a result, it consumes 4μA of quiescent current without being affected by external factors.

CD74HC112NSR Features

Tape & Reel (TR) package
74HC series
16 pins

CD74HC112NSR Applications

There are a lot of Texas Instruments CD74HC112NSR Flip Flops applications.

• Frequency Dividers
• Single Down Count-Control Line
• Data transfer
• Consumer
• Shift registers
• Storage Registers
• Asynchronous counter
• Storage registers
• Test & Measurement
• Balanced 24 mA output drivers