-3V~-5.5V 3GHz D-Type Flip Flop QUAD 100EP29 20 Pins 57mA 100EP Series 20-VFQFN Exposed Pad
SOT-23
MC100EP29MNTXG Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
12 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
20-VFQFN Exposed Pad
Number of Pins
20
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2006
Series
100EP
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
20
Type
D-Type
Terminal Finish
Tin (Sn)
Additional Feature
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
Subcategory
FF/Latches
Technology
ECL
Voltage - Supply
-3V~-5.5V
Terminal Position
QUAD
Terminal Form
NO LEAD
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Supply Voltage
3.3V
Terminal Pitch
0.5mm
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
100EP29
Function
Set(Preset) and Reset
Qualification Status
Not Qualified
Output Type
Differential
Polarity
Non-Inverting
Supply Voltage-Max (Vsup)
5.5V
Power Supplies
-4.5V
Supply Voltage-Min (Vsup)
3V
Number of Circuits
2
Clock Frequency
3GHz
Propagation Delay
500 ps
Turn On Delay Time
420 ps
Logic Function
AND
Current - Quiescent (Iq)
57mA
Halogen Free
Halogen Free
Number of Bits per Element
1
Trigger Type
Positive, Negative
High Level Output Current
-50mA
Low Level Output Current
50mA
Number of Output Lines
1
Clock Edge Trigger Type
Positive Edge
Length
4mm
Width
4mm
RoHS Status
RoHS Compliant
Lead Free
Lead Free
MC100EP29MNTXG Product Details
MC100EP29MNTXG Overview
In the form of 20-VFQFN Exposed Pad, it has been packaged. It is contained within the Tape & Reel (TR)package. Differentialis the output configured for it. In the configuration of the trigger, Positive, Negativeis used. There is an electronic component mounted in the way of Surface Mount. A voltage of -3V~-5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis used in the operation. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 100EPseries of FPGAs. A frequency of 3GHzshould not be exceeded by its output. As a result, it consumes 57mA quiescent current. Currently, there are 20 terminations. This D latch belongs to the family of 100EP29. A voltage of 3.3V is used as the power supply for this D latch. Electronic part Surface Mountis mounted in the way. There are 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. The maximal supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 3V. 2 circuits are used to achieve its superior flexibility. It operates from -4.5V power supplies. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Additionally, you may refer to the additional NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V of the electronic flip flop. -50mAis the output current at high level. It is set to 50mAfor the low level output current.
MC100EP29MNTXG Features
Tape & Reel (TR) package 100EP series 20 pins -4.5V power supplies
MC100EP29MNTXG Applications
There are a lot of ON Semiconductor MC100EP29MNTXG Flip Flops applications.