MC10E431FN Overview

The flip flop is packaged in 28-LCC (J-Lead). You can find it in the Tubepackage. As configured, the output uses Differential. There is a trigger configured with Positive, Negative. It is mounted in the way of Surface Mount. The JK flip flop operates at -4.2V~-5.7Vvolts. In this case, the operating temperature is 0°C~85°C TA. It is an electronic flip flop with the type D-Type. It belongs to the 10Eseries of FPGAs. There should be no greater frequency than 1.1GHzon its output. This process consumes 132mA quiescents. Currently, there are 28 terminations. JK flip flop belongs to 10E431 family. A voltage of 5V is used as the power supply for this D latch. 10Eis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. A total of 28pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. It reaches 5.7Vwhen the maximum supply voltage (Vsup) is applied. A normal operating voltage (Vsup) should remain above 4.2V. In order for the device to operate, it requires -5.2V power supplies. 3input lines are available for you to choose from. NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vis also one of its characteristics.

MC10E431FN Features

Tube package
10E series
28 pins
-5.2V power supplies

MC10E431FN Applications

There are a lot of ON Semiconductor MC10E431FN Flip Flops applications.

• Data Synchronizers
• Buffered Clock
• Automotive
• Clock pulse
• Digital electronics systems
• Matched Rise and Fall
• Divide a clock signal by 2 or 4
• Balanced Propagation Delays
• Reduced system switching noise
• EMI reduction circuitry