74FCT2574CTSOCTG4 Overview

20-SOIC (0.295, 7.50mm Width)is the packaging method. There is an embedded version in the package Tape & Reel (TR). The output it is configured with uses Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. In this case, the operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. FPGAs belonging to the 74FCTseries contain this type of chip. A total of 1elements are present in it. This process consumes 200μA quiescents. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74FCT2574family includes it. An input voltage of 5Vpowers the D latch. This JK flip flop has a 5pFfarad input capacitance. This D flip flop belongs to the family of FCT. It is mounted in the way of Surface Mount. It is designed with 20 pins. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. 8bits are used in its design. As soon as Vsup reaches 5.25V, the maximum supply voltage is reached. It is imperative that the supply voltage (Vsup) is maintained above 4.75Vin order to ensure normal operation. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. It operates from 5V power supplies. The D flip flop has no ports embedded. The 12mA output current allows it to be designed with the greatest amount of flexibility. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. This can be achieved at a frequency of 250MHz.

74FCT2574CTSOCTG4 Features

Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies

74FCT2574CTSOCTG4 Applications

There are a lot of Texas Instruments 74FCT2574CTSOCTG4 Flip Flops applications.

• Circuit Design
• Guaranteed simultaneous switching noise level
• Functionally equivalent to the MC10/100EL29
• Buffer registers
• 2 – Bit synchronous counter
• Clock pulse
• Pattern generators
• Shift Registers
• Consumer
• Safety Clamp