MC10EL31DG Overview

The item is packaged in 8-SOIC (0.154, 3.90mm Width)cases. D flip flop is included in the Tubepackage. T flip flop uses Differentialas its output configuration. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of -4.2V~-5.7Vis required for its operation. It is operating at -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The 10ELseries comprises this type of FPGA. A frequency of 2.8GHzshould not be exceeded by its output. As a result, it consumes 32mA of quiescent current without being affected by external factors. Terminations are 8. This D latch belongs to the family of 10EL31. It is powered from a supply voltage of 5V. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 8. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. 1bits are used in its design. Vsup reaches 5.7V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be kept above 4.2V. The superior flexibility of this product is achieved by using 1 circuits. In light of its reliable performance, this T flip flop is well suited for RAIL. There are -5.2V power supplies attached to it. The output current of 50mA makes it feature maximum design flexibility. Additionally, there are NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V on the electronic flip flop that can be referred to. A 50mAvalue is set for the high level output current. Low level output current is set to 50mA.

MC10EL31DG Features

Tube package
10EL series
8 pins
1 Bits
-5.2V power supplies

MC10EL31DG Applications

There are a lot of ON Semiconductor MC10EL31DG Flip Flops applications.

• Bus hold
• 2 – Bit synchronous counter
• Balanced 24 mA output drivers
• Communications
• Memory
• Set-reset capability
• Control circuits
• Registers
• Shift registers
• Convert a momentary switch to a toggle switch