74HC374DTR2G Overview
As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). You can find it in the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 2V~6V. The operating temperature is -55°C~125°C TA. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74HC series. You should not exceed 35MHzin the output frequency of the device. In total, there are 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. A total of 20terminations have been recorded. The power source is powered by 3V. There is 10pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as HC/UH. The maximal supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. The D flip flop has no ports embedded.
74HC374DTR2G Features
Tape & Reel (TR) package
74HC series
74HC374DTR2G Applications
There are a lot of Rochester Electronics, LLC 74HC374DTR2G Flip Flops applications.
- Buffer registers
- Data Synchronizers
- Common Clocks
- Power down protection
- Guaranteed simultaneous switching noise level
- Memory
- Divide a clock signal by 2 or 4
- Storage registers
- Synchronous counter
- Set-reset capability
