MC10EL52DG Overview

8-SOIC (0.154, 3.90mm Width)is the packaging method. It is included in the package Tube. There is a Differentialoutput configured with it. The trigger configured with it uses Positive, Negative. It is mounted in the way of Surface Mount. With a supply voltage of -4.2V~-5.7V volts, it operates. A temperature of -40°C~85°C TAis used in the operation. D-Typeis the type of this D latch. This type of FPGA is a part of the 10EL series. It should not exceed 2.8GHzin its output frequency. As a result, it consumes 25mA quiescent current. A total of 8 terminations have been made. The 10EL52family includes it. The power supply voltage is 5V. Surface Mount mounts this electronic component. With its 8pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. 1bits are used in its design. It reaches 5.7Vwhen the maximum supply voltage (Vsup) is applied. Keeping the supply voltage (Vsup) above 4.2V is necessary for normal operation. Its flexibility is enhanced by 1 circuits. Considering its reliability, this T flip flop is well suited for RAIL. An electrical current of -5.2V volts is applied to it. This T flip flop features a maximum design flexibility due to its output current of 50mA. Additionally, it is characterized by NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V. A 50mAvalue is set for the high level output current. In the low level output current setting, 50mAis used.

MC10EL52DG Features

Tube package
10EL series
8 pins
1 Bits
-5.2V power supplies

MC10EL52DG Applications

There are a lot of ON Semiconductor MC10EL52DG Flip Flops applications.

• Synchronous counter
• Buffered Clock
• Latch
• Data transfer
• Common Clocks
• Cold spare funcion
• Convert a momentary switch to a toggle switch
• Supports Live Insertion
• Data Synchronizers
• Storage Registers