SN74ALVCH374DGVR Overview

The flip flop is packaged in a case of 20-TFSOP (0.173, 4.40mm Width). The Tape & Reel (TR)package contains it. The output it is configured with uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 1.65V~3.6V volts, it operates. The operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74ALVCH series. This D flip flop should not have a frequency greater than 150MHz. A total of 1elements are contained within it. It consumes 10μA of quiescent Currently, there are 20 terminations. JK flip flop belongs to 74ALVCH374 family. The power source is powered by 1.8V. This T flip flop has a capacitance of 5pF farads at the input. Electronic devices of this type belong to the ALVC/VCX/Afamily. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. The flip flop is designed with 8bits. In order to achieve its superior flexibility, 8 circuits are used. Considering its reliability, this T flip flop is well suited for TR. This flip flop has a total of 2ports. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

SN74ALVCH374DGVR Features

Tape & Reel (TR) package
74ALVCH series
20 pins
8 Bits

SN74ALVCH374DGVR Applications

There are a lot of Texas Instruments SN74ALVCH374DGVR Flip Flops applications.

• EMI reduction circuitry
• ESD protection
• Parallel data storage
• Bus hold
• Digital electronics systems
• Circuit Design
• Automotive
• Communications
• Event Detectors
• Synchronous counter