MC10EP29MNG Overview

As a result, it is packaged as 20-VFQFN Exposed Pad. D flip flop is included in the Tubepackage. As configured, the output uses Differential. It is configured with a trigger that uses a value of Positive, Negative. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of -3V~-5.5V volts. It is operating at -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The 10EPseries comprises this type of FPGA. It should not exceed 3GHzin its output frequency. As a result, it consumes 57mA quiescent current. It has been determined that there have been 20 terminations. Members of the 10EP29family make up this object. A voltage of 3.3V provides power to the D latch. An electronic device belonging to the family 10Ecan be found here. It is mounted in the way of Surface Mount. The 20pins are designed into the board. There is a clock edge trigger type of Positive Edgeon this device. This device is part of the FF/Latchesbase part number family. As soon as 5.5Vis reached, Vsup reaches its maximum value. Normally, the supply voltage (Vsup) should be above 3V. Due to its superior flexibility, it uses 2 circuits. In light of its reliable performance, this T flip flop is well suited for RAIL. To operate, the chip has a total of 1 output lines. In addition, you can refer to the additinal NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V of the D latch. A -50mAvalue is set for the high level output current. A 50mAvalue is set for low-level output current.

MC10EP29MNG Features

Tube package
10EP series
20 pins

MC10EP29MNG Applications

There are a lot of ON Semiconductor MC10EP29MNG Flip Flops applications.