MC10EP31MNR4G Overview

In the form of 8-VFDFN Exposed Pad, it has been packaged. D flip flop is included in the Tape & Reel (TR)package. T flip flop is configured with an output of Differential. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. A supply voltage of -3V~-5.5V is required for operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 10EP series. Its output frequency should not exceed 3GHz. D latch consists of 1 elements. As a result, it consumes 45mA quiescent current. JK flip flop belongs to 10EP31 family. It is mounted by the way of Surface Mount. This board is designed with 8pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is designed with 1bits. The superior flexibility of this product is achieved by using 1 circuits. It has 1 output lines to operate. A total of 1input lines have been provided. Ideally, the operating temperature should be lower than 85°C. Temperatures above -40°Cshould be used. Initially, it requires a voltage of 3V as the minimum supply voltage. The maximum supply voltage supported by the flip flop is 5.5V. 3GHzis the maximum frequency that can be achieved.

MC10EP31MNR4G Features

Tape & Reel (TR) package
10EP series
8 pins
1 Bits

MC10EP31MNR4G Applications

There are a lot of ON Semiconductor MC10EP31MNR4G Flip Flops applications.

• Memory
• Supports Live Insertion
• Bounce elimination switch
• Shift Registers
• Patented noise
• Clock pulse
• Buffered Clock
• Counters
• Load Control
• Test & Measurement