SN74ABT823DBR Overview

The package is in the form of 24-SSOP (0.209, 5.30mm Width). The package Cut Tape (CT)contains it. There is a Tri-State, Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. -40°C~85°C TAis the operating temperature. The type of this D latch is D-Type. This type of FPGA is a part of the 74ABT series. This D flip flop should not have a frequency greater than 200MHz. A total of 1elements are contained within it. There is a consumption of 250μAof quiescent energy. In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74ABT823 family contains this object. A voltage of 5V provides power to the D latch. JK flip flop input capacitance is 4pF farads. Devices in the ABTfamily are electronic devices. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 24. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is included in FF/Latches. There are 9bits in this flip flop. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. There are 5V power supplies attached to it. The D flip flop has no ports embedded. If high efficiency is desired, the supply voltage should be kept at 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It has 9lines. WITH CLEAR AND CLOCK ENABLEis also one of its characteristics.

SN74ABT823DBR Features

Cut Tape (CT) package
74ABT series
24 pins
9 Bits
5V power supplies

SN74ABT823DBR Applications

There are a lot of Texas Instruments SN74ABT823DBR Flip Flops applications.

• Memory
• QML qualified product
• Matched Rise and Fall
• Control circuits
• Load Control
• ESD performance
• Consumer
• Asynchronous counter
• Reduced system switching noise
• 2 – Bit synchronous counter