MC10H186L Overview

16-CDIP (0.300, 7.62mm)is the packaging method. The Tubepackage contains it. The output it is configured with uses Non-Inverted. The trigger it is configured with uses Positive Edge. Through Holemounts this electrical part. Powered by a -4.9V~-5.46Vvolt supply, it operates as follows. Temperature is set to 0°C~75°C TA. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 10H series. In order for it to function properly, its output frequency should not exceed 250MHz. There are 1 elements in it. T flip flop consumes 110mA quiescent energy. Currently, there are 16 terminations. You can search similar parts based on 10H186. This D flip flop belongs to the family of 10H. Through Hole mounts this electronic component. The 16pins are designed into the board. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. 6bits are used in its design. In order to achieve its superior flexibility, 7 circuits are used. In order to operate, the chip has 6 output lines. The high level output current is set to 50mA. In the low level output current setting, the current is set to 50mA.

MC10H186L Features

Tube package
10H series
16 pins
6 Bits

MC10H186L Applications

There are a lot of ON Semiconductor MC10H186L Flip Flops applications.

• Modulo – n – counter
• ESD performance
• Balanced Propagation Delays
• Reduced system switching noise
• Communications
• Common Clocks
• Buffered Clock
• Patented noise
• Control circuits
• Storage Registers