In order to package it as a clock IC, the Tape & Reel (TR) package is used. Clock PLL is embedded in the 8-SOIC (0.154, 3.90mm Width) package. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. 8 terminations can be found in frequency generators. It is designed that the Clock PLL's input should be CML, ECL. To access the full performance of the electronic component, 1 circuits are implemented. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. There should be a voltage supply above 2.7V for this frequency generator in order to ensure its safety. Clock generator ic works with 2.7V~5.5V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. ECL logic levels are supported by this RF synthesizer. This electronic component can be classified into Prescaler. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. It is possible to find its related electronic parts by searching for the base part number MC12093. There are 8 pins on the frequency generator that are available for use. The supply voltage should be maintained at 5V for high efficiency. For better clock signal output, this clock PLL is featured with SELECTABLE DIVISION RATIO 4 AVAILABLE. You can find similar electronic components by searching for the ECL family. Using a frequency of 1.1GHz allows frequency synthesizer to achieve high efficiencies. This time clock generator requires a supply current of 3mA in order to operate properly.
MC12093DR2G Features
Available in the 8-SOIC (0.154, 3.90mm Width) Operating supply voltage of 5V
MC12093DR2G Applications
There are a lot of ON Semiconductor MC12093DR2G Clock Generators applications.