MC14052BDG Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 2:4. Temperatures around -55°C~125°C TA are extended for operation. Total terminations are 16. The electronic part provides high-quality output because it has 4 channels. A 5V voltage supply should turn on and run the electronic component. This electrical component is included in the 16 series of products. Unlike digital switches, these are based on DP4T switching circuits. Try searching for MC14052B variants of the analog switch ic. It has an internal resistance of 1.05kOhm. To find out what the functions of 16 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 18V in normal situations. The analog switch ic is of the Dual supply type and is cost-effective. It is recommended to use 3V as the lowest voltage for the electrical part. Analogue multiplexers require a 3V~18V voltage to drain from a single voltage supply. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. The 8 inputs need to be operated in order to work. It is possible to transfer data over a 17MHz-bandwidth.

MC14052BDG Features

4 Channels
Switch Circuit: DP4T
Bandwidth: 17MHz

MC14052BDG Applications

There are a lot of ON Semiconductor MC14052BDG Analog Switches & Multiplexers ICs applications.

• Avionics test equipment
• Central office
• Cellular phones
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• High speed data transmission line cards
• PDAs
• Audio and video routing
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Battery-powered systems
• Cable Telephony – NIU, Set-Top Box, Home Side Box