MC14053BFEL Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.209, 5.30mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -55°C~125°C TA extended. In total, there are 16 terminations. A electrical component with 2 channels is capable of high-quality output. A 5V voltage supply should turn on and run the electronic component. 16 pins are injected to the electronic part body. SPDT switching circuits are used in these analog switch ics. This multiplexer is composed of 3 circuits. Try searching for the analog switch ic with MC14053B if you are looking for variants. In this multiplexer, the internal resistance is 280Ohm. For functions related to 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 18V. An effective Dual supply digital multiplexer. The lowest voltage fed to the electronic component should be 3V. This analogue multiplexer requires a voltage of 3V~18V when it drains from a single voltage supply. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. A 6 input needs to be operated. This switch operates within the bandwidth of 17MHz.

MC14053BFEL Features

2 Channels
Switch Circuit: SPDT
Bandwidth: 17MHz

MC14053BFEL Applications

There are a lot of ON Semiconductor MC14053BFEL Analog Switches & Multiplexers ICs applications.

• Central office
• Audio and video signal routing
• Transmit
• Power routing
• PDH Multiplexers
• Microprocessor controlled systems
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Cable PC
• Switching Systems
• Audio signal routing