MC14076BCPG Overview

The package is in the form of 16-DIP (0.300, 7.62mm). It is included in the package Tube. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Through Holemounts this electrical part. The JK flip flop operates with an input voltage of 3V~18V volts. Temperature is set to -55°C~125°C TA. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 4000B series. Its output frequency should not exceed 12MHz Hz. A total of 1 elements are present. T flip flop consumes 20μA quiescent energy. A total of 16terminations have been recorded. The object belongs to the 4076 family. A voltage of 5V provides power to the D latch. Its input capacitance is 5pF farads. There is an electronic part mounted in the way of Through Hole. 16pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. This device is part of the FF/Latchesbase part number family. It is designed with a number of bits of 4. For normal operation, the supply voltage (Vsup) should be kept above 3V. As a result of its reliable performance, this T flip flop is suitable for RAIL. With a current output of 8.8mA , it offers maximum design flexibility. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. In its basic building block, there are 4 gates.

MC14076BCPG Features

Tube package
4000B series
16 pins
4 Bits
4 gates

MC14076BCPG Applications

There are a lot of ON Semiconductor MC14076BCPG Flip Flops applications.

• Buffer registers
• Shift registers
• High Performance Logic for test systems
• Pattern generators
• Bus hold
• Frequency division
• CMOS Process
• Latch
• Set-reset capability
• ESD performance