MC33060ADR2 Overview

Capsuled in the 14-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. 1 outputs are supported by the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 7V~40V and has a 7V~40V supply voltage. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. In this switching controller, the switch can be set to 25kHz. dc dc regulators can be carried out with Surface Mount. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a DUAL terminal on the switching converters. A variety of terminations with 14 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. MC33060A can be searched for other relevant dc to dc converter ics. There are only 14 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 7V. DC regulator outputs 30V voltage based on test statistics. The dc to dc regulator is limited to 40V input voltage. You should note that the dc dc regulator's usual output current is 200mA. It is set to 96 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. The Surface Mount makes DC switcher suitable for most applications and prototypes. Switching controllers operate at 200kHz frequencies. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 15V.

MC33060ADR2 Features

Transistor Driver Outputs
Switching Frequency: 25kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 200kHz

MC33060ADR2 Applications

There are a lot of ON Semiconductor MC33060ADR2 DC to DC converter applications.

• Injection molding machinery
• Ball screw pair
• Linear guide
• Surface processing equipment
• Grinders
• Electrical distribution systems
• Drilling machines
• Program control systems
• Experimental setup
• Automation technology