MC74AC374DTR2 Overview
20-TSSOP (0.173, 4.40mm Width)is the packaging method. You can find it in the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with a trigger that uses Positive Edge. Surface Mountmounts this electrical part. A voltage of 2V~6Vis used as the supply voltage. In the operating environment, the temperature is -40°C~85°C TA. This D latch has the type D-Type. The FPGA belongs to the 74AC series. You should not exceed 155MHzin its output frequency. The element count is 1 . There is 8μA quiescent consumption. A total of 20terminations have been recorded. This D latch belongs to the family of 74AC374. A voltage of 5V is used to power it. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Devices in the ACfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. A total of 20pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. There are 8bits in this flip flop. Vsup reaches 6V, the maximal supply voltage. Normally, the supply voltage (Vsup) should be kept above 2V. The superior flexibility of this product is achieved by using 8 circuits. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. A D flip flop with 2embedded ports is available. There are 3 output lines on it.
MC74AC374DTR2 Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
MC74AC374DTR2 Applications
There are a lot of ON Semiconductor MC74AC374DTR2 Flip Flops applications.
- Data transfer
- Parallel data storage
- Synchronous counter
- Power down protection
- QML qualified product
- Balanced 24 mA output drivers
- Common Clocks
- Dynamic threshold performance
- Storage registers
- High Performance Logic for test systems
