MC74AC74DTR2G Overview

The flip flop is packaged in a case of 14-TSSOP (0.173, 4.40mm Width). As part of the package Tape & Reel (TR), it is embedded. This output is configured with Differential. The trigger it is configured with uses Positive Edge. There is an electric part mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. The 74ACseries comprises this type of FPGA. There should be no greater frequency than 160MHzon its output. There is a consumption of 4μAof quiescent energy. A total of 14terminations have been recorded. If you search by 74AC74, you will find similar parts. The D flip flop is powered by a voltage of 5V . This JK flip flop has a 4.5pFfarad input capacitance. This D flip flop belongs to the family of AC. A part of the electronic system is mounted in the way of Surface Mount. There are 14pins on it. In this device, the clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. There is a 6Vmaximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. Using 2 circuits, it is highly flexible. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The power supply is 5V. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It operates with 1 output lines.

MC74AC74DTR2G Features

Tape & Reel (TR) package
74AC series
14 pins
5V power supplies

MC74AC74DTR2G Applications

There are a lot of ON Semiconductor MC74AC74DTR2G Flip Flops applications.

• Dynamic threshold performance
• Convert a momentary switch to a toggle switch
• Buffer registers
• Data Synchronizers
• QML qualified product
• Divide a clock signal by 2 or 4
• Digital electronics systems
• CMOS Process
• Count Modes
• Asynchronous counter