MC74ACT374DWR2G Overview

20-SOIC (0.295, 7.50mm Width)is the packaging method. It is contained within the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. In this case, the operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. It belongs to the 74ACTseries of FPGAs. You should not exceed 160MHzin its output frequency. D latch consists of 1 elements. A total of 20 terminations have been made. If you search by 74ACT374, you will find similar parts. An input voltage of 5Vpowers the D latch. JK flip flop input capacitance is 4.5pF farads. An electronic device belonging to the family ACTcan be found here. Electronic part Surface Mountis mounted in the way. The 20pins are designed into the board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part is included in FF/Latches. There are 8bits in its design. Its flexibility is enhanced by 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. The D flip flop is embedded with 2ports. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. In order to operate, the chip has 3 output lines. As a result, it consumes 8μA of quiescent current without being affected by external factors.

MC74ACT374DWR2G Features

Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies

MC74ACT374DWR2G Applications

There are a lot of ON Semiconductor MC74ACT374DWR2G Flip Flops applications.

• Power down protection
• Shift registers
• Parallel data storage
• Data storage
• Digital electronics systems
• Memory
• Single Down Count-Control Line
• Circuit Design
• Convert a momentary switch to a toggle switch
• Functionally equivalent to the MC10/100EL29