MC74HC374ADT Overview

In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. D flip flop is included in the Tubepackage. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. It is operating at a temperature of -55°C~125°C TA. This D latch has the type D-Type. This type of FPGA is a part of the 74HC series. It should not exceed 35MHzin its output frequency. In total, it contains 1 elements. T flip flop consumes 4μA quiescent energy. Currently, there are 20 terminations. It is a member of the 74HC374 family. It is powered from a supply voltage of 3V. This JK flip flop has a 10pFfarad input capacitance. It belongs to the family of electronic devices known as HC/UH. There is an electronic component mounted in the way of Surface Mount. The 20pins are designed into the board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. The design is based on 8bits. It reaches the maximum supply voltage (Vsup) at 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. Its superior flexibility is attributed to its use of 8 circuits. Considering the reliability of this T flip flop, it is well suited for RAIL. The D latch runs on a voltage of 2/6V volts. A D flip flop with 2embedded ports is available. In addition to its maximum design flexibility, the output current of the T flip flop is 6mA. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.

MC74HC374ADT Features

Tube package
74HC series
20 pins
8 Bits
2/6V power supplies

MC74HC374ADT Applications

There are a lot of ON Semiconductor MC74HC374ADT Flip Flops applications.

• ESCC
• Communications
• ESD performance
• Automotive
• Latch
• Counters
• Reduced system switching noise
• Balanced 24 mA output drivers
• Parallel data storage
• Single Up Count-Control Line