The item is packaged in 20-VFBGAcases. It is contained within the Tape & Reel (TR)package. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 2V~5.5V volts. It is operating at -40°C~85°C TA. The type of this D latch is D-Type. This type of FPGA is a part of the 74LV series. You should not exceed 170MHzin its output frequency. A total of 1 elements are present. As a result, it consumes 20μA of quiescent current without being affected by external factors. It has been determined that there have been 20 terminations. JK flip flop belongs to 74LV374 family. The D flip flop is powered by a voltage of 2.5V . Its input capacitance is 2.9pF farads. An electronic device belonging to the family LV/LV-A/LVX/Hcan be found here. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). A normal operating voltage (Vsup) should remain above 2V. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. A total of 3.3V power supplies are needed to run it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. As a result of its output current of 16mA, it is very flexible in terms of design. This input has 2lines.
SN74LV374AZQNR Features
Tape & Reel (TR) package 74LV series 20 pins 3.3V power supplies
SN74LV374AZQNR Applications
There are a lot of Texas Instruments SN74LV374AZQNR Flip Flops applications.