MC74HC574ADTR2G Overview

The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tape & Reel (TR). Currently, the output is configured to use Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountis in the way of this electric part. A voltage of 2V~6Vis required for its operation. In this case, the operating temperature is -55°C~125°C TA. This D latch has the type D-Type. It belongs to the 74HCseries of FPGAs. A frequency of 35MHzshould be the maximum output frequency. D latch consists of 1 elements. A total of 20terminations have been recorded. If you search by 74HC574, you will find similar parts. It is powered by a voltage of 3V . Its input capacitance is 10pFfarads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. In this case, the electronic component is mounted in the way of Surface Mount. The 20pins are designed into the board. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 8 Bits. In this case, the maximum supply voltage (Vsup) reaches 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Despite its superior flexibility, it relies on 8 circuits to achieve it. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. A power supply of 2/6Vis required to operate it. The flip flop contains 2ports. There are 3 output lines on it. Despite external influences, it consumes 4μAof quiescent current.

MC74HC574ADTR2G Features

Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies

MC74HC574ADTR2G Applications

There are a lot of ON Semiconductor MC74HC574ADTR2G Flip Flops applications.

• Single Up Count-Control Line
• Pattern generators
• Reduced system switching noise
• Bounce elimination switch
• Power down protection
• Instrumentation
• Registers
• Communications
• Counters
• Frequency division