SN74LVC1G74DCUT Overview

8-VFSOP (0.091, 2.30mm Width)is the packaging method. The Tape & Reel (TR)package contains it. T flip flop uses Differentialas the output. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 1.65V~5.5V volts. It is operating at -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74LVC series. In order for it to function properly, its output frequency should not exceed 200MHz. As a result, it consumes 10μA quiescent current and is not affected by external forces. The number of terminations is 8. Members of the 74LVC1G74family make up this object. A voltage of 1.8V is used to power it. The input capacitance of this JK flip flopis 5pF farads. An electronic device belonging to the family LVC/LCX/Zcan be found here. In this case, the electronic component is mounted in the way of Surface Mount. This board is designed with 8pins on it. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. An electronic part with 1bits has been designed. In this case, the maximum supply voltage (Vsup) reaches 5.5V. 1 circuits are used to achieve its superior flexibility. Considering its reliability, this T flip flop is well suited for TR. There are 3.3V power supplies attached to it. A basic building block consists of 2 gates.

SN74LVC1G74DCUT Features

Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
3.3V power supplies
2 gates

SN74LVC1G74DCUT Applications

There are a lot of Texas Instruments SN74LVC1G74DCUT Flip Flops applications.

• CMOS Process
• ESCC
• Balanced Propagation Delays
• Buffer registers
• ESD protection
• Dynamic threshold performance
• Instrumentation
• 2 – Bit synchronous counter
• Asynchronous counter
• High Performance Logic for test systems