MC74HCT4851ADR2G Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 8:1 is the ratio of multiplexer to demultiplexer circuits. Around -55°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. By its 8 channels, the electronic component provides high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. Circuits number 1 make up this analogue multiplexer. Try searching for MC74HCT4851A variants of the analog switch ic. As far as internal resistance is concerned, it has 400Ohm. Please refer to the datasheets for 16 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 4.5V. For this digital switch to work, 2μA current would suffice. A voltage of 4.5V~5.5V is required to drain this analog switch from a single voltage supply.

MC74HCT4851ADR2G Features

8 Channels
2μA Supply Current

MC74HCT4851ADR2G Applications

There are a lot of ON Semiconductor MC74HCT4851ADR2G Analog Switches & Multiplexers ICs applications.

• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Multiplexers
• Switching Systems
• Frame Relay Equipment
• RGB switches
• Digital access cross connects
• Central office
• Channelized and Unchannelized DS3 applications
• Audio signal routing
• PDAs