MC74HCT4852ADR2G Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Operational temperature extended around -55°C~125°C TA. The total number of terminations is 16. The electronic part provides high-quality output because it has 4 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. Electronic part bodies are injected with 16 pins. Multiplexers built on a SP4T switching circuit are built. The circuits in this analogue multiplexer number 2. Look for analog switch ic variants by searching with MC74HCT4852A. It has an internal resistance of 600Ohm. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Single supply type digital switch with a low cost. It is recommended to use 4.5V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 2μA current. A voltage of 4.5V~5.5V is required to drain this analog switch from a single voltage supply. There is a voltage range of 5V operating voltages for the electrical part. There are 8 inputs to be operated.

MC74HCT4852ADR2G Features

4 Channels
Switch Circuit: SP4T
2μA Supply Current

MC74HCT4852ADR2G Applications

There are a lot of ON Semiconductor MC74HCT4852ADR2G Analog Switches & Multiplexers ICs applications.

• Optical Applications
• Access Concentrators
• Low-Voltage
• MP3 players
• Medical Instrumentation
• Audio and video routing
• High speed data transmission line cards
• SDH
• SONET/SDH ADM
• Digital cross connects (DSX-1)