MC74HCT574ADTR2G Overview

20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. A package named Tape & Reel (TR)includes it. The output it is configured with uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. In the operating environment, the temperature is -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74HCTseries contain this type of chip. You should not exceed 30MHzin the output frequency of the device. In total, there are 1 elements. As a result, it consumes 4μA quiescent current. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. D latch belongs to the 74HCT574 family. The power supply voltage is 5V. This JK flip flop has a 10pFfarad input capacitance. In terms of electronic devices, this device belongs to the HCTfamily of devices. Electronic part Surface Mountis mounted in the way. This board has 20 pins. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. It is designed with 8bits. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. The power supply is 5V. There are 2 ports embedded in the flip flops. In order to achieve high efficiency, the supply voltage should be maintained at 5V. In order to operate, the chip has 3 output lines. 8 channels are available.

MC74HCT574ADTR2G Features

Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies

MC74HCT574ADTR2G Applications

There are a lot of ON Semiconductor MC74HCT574ADTR2G Flip Flops applications.

• Frequency Dividers
• Power down protection
• Clock pulse
• 2 – Bit synchronous counter
• Latch-up performance
• Safety Clamp
• Common Clocks
• Computing
• Supports Live Insertion
• Pattern generators