CY74FCT374TSOCT Overview

The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). It is contained within the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.75V~5.25Vis used as the supply voltage. A temperature of -40°C~85°C TAis used in the operation. D-Typeis the type of this D latch. JK flip flop belongs to the 74FCTseries of FPGAs. This D flip flop should not have a frequency greater than 250MHz. A total of 1 elements are present. This process consumes 200μA quiescents. The number of terminations is 20. JK flip flop belongs to 74FCT374 family. Power is supplied from a voltage of 5V volts. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It belongs to the family of electronic devices known as FCT. In this case, the electronic component is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. The design is based on 8bits. Due to its superior flexibility, it uses 8 circuits. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. A power supply of 5Vis required to operate it. There are 2 ports embedded in the flip flops. For high efficiency, the supply voltage should be kept at 5V. Its output current of 64mAallows for maximum design flexibility. To operate, the chip has a total of 3 output lines.

CY74FCT374TSOCT Features

Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies

CY74FCT374TSOCT Applications

There are a lot of Texas Instruments CY74FCT374TSOCT Flip Flops applications.

• Control circuits
• Latch
• Consumer
• Reduced system switching noise
• Safety Clamp
• Automotive
• Individual Asynchronous Resets
• Single Up Count-Control Line
• Instrumentation
• Supports Live Insertion