MC74LCX574DTG Overview

In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. It is contained within the Tubepackage. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger configured with it uses Positive Edge. Surface Mountis in the way of this electric part. Powered by a 2V~3.6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. It belongs to the 74LCXseries of FPGAs. A frequency of 150MHzshould be the maximum output frequency. D latch consists of 1 elements. It consumes 10μA of quiescent current without being affected by external factors. 20terminations have occurred. This D latch belongs to the family of 74LCX574. A voltage of 3.3V is used as the power supply for this D latch. A JK flip flop with a 7pFfarad input capacitance is used here. The electronic device belongs to the LVC/LCX/Zfamily. There is an electronic part mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device is part of the FF/Latchesbase part number family. It is designed with 8bits. Normally, the supply voltage (Vsup) should be kept above 2V. As a result of its reliable performance, this T flip flop is suitable for RAIL. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A high level of efficiency can be achieved by maintaining the supply voltage at 3.3V. With a current output of 24mA , it offers maximum design flexibility. The JK flip flop is with 3 output lines to operate. Currently, there are 8 channels available.

MC74LCX574DTG Features

Tube package
74LCX series
20 pins
8 Bits

MC74LCX574DTG Applications

There are a lot of ON Semiconductor MC74LCX574DTG Flip Flops applications.

• Dynamic threshold performance
• Buffered Clock
• ESD performance
• Pattern generators
• Frequency division
• Common Clocks
• Balanced 24 mA output drivers
• ESD protection
• Buffer registers
• Shift Registers