SN74ABT374AN Overview

The flip flop is packaged in 20-DIP (0.300, 7.62mm). A package named Tubeincludes it. There is a Tri-State, Non-Invertedoutput configured with it. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. Temperature is set to -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74ABTseries of FPGAs. You should not exceed 200MHzin its output frequency. A total of 1elements are contained within it. As a result, it consumes 250μA quiescent current and is not affected by external forces. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74ABT374, you will find similar parts. Power is provided by a 5V supply. Input capacitance of this device is 3.5pF farads. It belongs to the family of electronic devices known as ABT. There is an electronic part mounted in the way of Through Hole. This board has 20 pins. This device has the clock edge trigger type of Positive Edge. The part is included in FF/Latches. The flip flop is designed with 8bits. Its flexibility is enhanced by 8 circuits. A total of 5V power supplies are needed to run it. The flip flop has 2ports embedded within it. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 64mA. In order for the chip to function, it has 3output lines.

SN74ABT374AN Features

Tube package
74ABT series
20 pins
8 Bits
5V power supplies

SN74ABT374AN Applications

There are a lot of Texas Instruments SN74ABT374AN Flip Flops applications.

• Shift registers
• Load Control
• Convert a momentary switch to a toggle switch
• Control circuits
• Balanced 24 mA output drivers
• Differential Individual
• Individual Asynchronous Resets
• Computers
• ESD protection
• Bus hold