MC74LCX74MEL Overview

It is embeded in 14-SOIC (0.209, 5.30mm Width) case. Package Tape & Reel (TR)embeds it. Currently, the output is configured to use Differential. It is configured with the trigger Positive Edge. It is mounted in the way of Surface Mount. A voltage of 2V~3.6Vis required for its operation. Temperature is set to -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74LCXseries of FPGAs. You should not exceed 150MHzin the output frequency of the device. A total of 2elements are present in it. As a result, it consumes 10μA quiescent current and is not affected by external forces. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74LCX74 family. An input voltage of 2.5Vpowers the D latch. The input capacitance of this JK flip flopis 7pF farads. This D flip flop belongs to the family of LVC/LCX/Z. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 14. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. It is designed with 1bits. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 2V. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. A power supply of 3.3Vis required to operate it. It has 1lines.

MC74LCX74MEL Features

Tape & Reel (TR) package
74LCX series
14 pins
1 Bits
3.3V power supplies

MC74LCX74MEL Applications

There are a lot of ON Semiconductor MC74LCX74MEL Flip Flops applications.

• Functionally equivalent to the MC10/100EL29
• Count Modes
• Buffered Clock
• EMI reduction circuitry
• Dynamic threshold performance
• Event Detectors
• Common Clocks
• ATE
• Single Up Count-Control Line
• Synchronous counter