SN74HC574PWT Overview

The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). The package Tape & Reel (TR)contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. The operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The 74HCseries comprises this type of FPGA. It should not exceed 40MHzin terms of its output frequency. The list contains 1 elements. During its operation, it consumes 8μA quiescent energy. The number of terminations is 20. The 74HC574 family contains this object. The power supply voltage is 5V. Its input capacitance is 3pF farads. It belongs to the family of electronic devices known as HC/UH. This electronic part is mounted in the way of Surface Mount. The 20pins are designed into the board. There is a clock edge trigger type of Positive Edgeon this device. This device is part of the FF/Latchesbase part number family. There are 8bits in its design. The maximal supply voltage (Vsup) reaches 6V. A normal operating voltage (Vsup) should remain above 2V. Using 8 circuits, it is highly flexible. In light of its reliable performance, this T flip flop is well suited for TR. An electrical current of 2/6V volts is applied to it. The flip flop has 2ports embedded within it. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. With an output current of 7.8mA, this device offers maximum design flexibility. Currently, there are 3 input lines present.

SN74HC574PWT Features

Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies

SN74HC574PWT Applications

There are a lot of Texas Instruments SN74HC574PWT Flip Flops applications.

• Computing
• CMOS Process
• EMI reduction circuitry
• Counters
• Frequency Dividers
• Convert a momentary switch to a toggle switch
• Control circuits
• 2 – Bit synchronous counter
• Shift Registers
• Common Clocks