MC74LVX4051DTR2G Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operation at a temperature around -55°C~125°C TA. There are 16 terminations totally. The electronic part provides high-quality output because it has 8 channels. An 3V voltage supply should allow the electrical part to be turned on and run. There are 16 pins injected into the electronic part body. The circuits in this analogue multiplexer number 1. MC74LVX4051 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 55Ohm. To find out what the 16 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. An effective Single supply digital multiplexer. 2.5V should be the lowest voltage fed to the electronic component. An operating current of 40μA would be sufficient for this switch device. For this multiplexer, dual supply voltage is feasible, but it should not exceed 3V. If you are using a dual power supply, you should attach at least 1.25V. Operating the 8 inputs requires 8 inputs. The data can be transferred over a wide range of bandwidths, called 80MHz bandwidths.

MC74LVX4051DTR2G Features

8 Channels
40μA Supply Current
Bandwidth: 80MHz

MC74LVX4051DTR2G Applications

There are a lot of ON Semiconductor MC74LVX4051DTR2G Analog Switches & Multiplexers ICs applications.

• Communication systems
• Precision instrumentation
• HDTV
• Transmit
• PBX interfaces
• Cross Connects
• Cable PC
• Cell phones
• Remote Powered Equipment
• DSLAMs