MC74LVXT4053DTRG Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -55°C~125°C TA. Total terminations are 16. By its 2 channels, the electronic component provides high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. On the other hand, analog switches can be constructed using SPDT switching circuits. The multiplexer consists of 3 circuits. Look for analog switch ic variants by searching with MC74LVXT4053. A 55Ohm internal resistance characterizes this multiplexer. The functions of 16 pins can be found in the datasheets. Users should never supply a voltage higher than 6V to a switch device. The digital multiplexer has a low cost Dual supply. 2.5V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 40μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 3V. A dual power supply should have at least 1.25V voltage attached. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. It is possible to operate 6 inputs. It is possible to transfer data over a 80MHz-bandwidth.

MC74LVXT4053DTRG Features

2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 80MHz

MC74LVXT4053DTRG Applications

There are a lot of ON Semiconductor MC74LVXT4053DTRG Analog Switches & Multiplexers ICs applications.

• Imaging
• Wireless Local Loop
• Communications systems
• Cable Modem
• Battery-powered systems
• Relay Replacement
• Digital access cross connects
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Isolation
• Ultrasound