MC74VHC4052DTR2G Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. Multiplexers like this are mounted in the Surface Mount position. 4:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -55°C~125°C TA. In total, 16 terminations have occurred. A electrical component with 8 channels is capable of high-quality output. A 4.5V voltage supply should turn on and run the electronic component. There are 16 pins injected into the electronic part body. SP4T switching circuits are used in these analog switch ics. There are 2 circuits in this switch device. Using the MC74VHC4052 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 200Ohm. Please refer to the datasheets for 16 pins functions. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 6V. A analog switch ic that has a cost-effective Dual, Single supply type. 2V should be the lowest voltage fed to the electronic component. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 6V. If you are using a dual power supply, you should attach at least 1V. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. There are 8 inputs to be operated. The data can be transferred over a wide range of bandwidths, called 95MHz bandwidths.

MC74VHC4052DTR2G Features

8 Channels
Switch Circuit: SP4T
Bandwidth: 95MHz

MC74VHC4052DTR2G Applications

There are a lot of ON Semiconductor MC74VHC4052DTR2G Analog Switches & Multiplexers ICs applications.

• Microprocessor Controlled Analog Systems
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Audio signal routing
• Transmit
• Digital access cross connects
• Avionics test equipment
• Cell phones
• New designs requiring multiplexer functions
• Intelligent PBX
• USB 1.1 signal switching circuits