MC74VHCT574ADWRG Overview

The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). It is contained within the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas the output. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. In the operating environment, the temperature is -40°C~85°C TA. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74VHCT series. You should not exceed 130MHzin its output frequency. A total of 1 elements are present. As a result, it consumes 4μA of quiescent current without being affected by external factors. Terminations are 20. It is a member of the 74VHCT574 family. Power is provided by a 5V supply. The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. An electronic device belonging to the family AHCT/VHCTcan be found here. It is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. It is included in FF/Latches. The flip flop is designed with 8bits. The superior flexibility is achieved through the use of 8 circuits. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. A total of 5V power supplies are needed to run it. There are 2 ports embedded in the flip flops. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. In order to operate, the chip has 3 output lines.

MC74VHCT574ADWRG Features

Tape & Reel (TR) package
74VHCT series
20 pins
8 Bits
5V power supplies

MC74VHCT574ADWRG Applications

There are a lot of ON Semiconductor MC74VHCT574ADWRG Flip Flops applications.

• Data storage
• Latch
• Reduced system switching noise
• Dynamic threshold performance
• Event Detectors
• CMOS Process
• Balanced Propagation Delays
• Shift registers
• Common Clocks
• ESD protection