SN74LVC74APWT Overview

It is packaged in the way of 14-TSSOP (0.173, 4.40mm Width). The package Tape & Reel (TR)contains it. Currently, the output is configured to use Differential. It is configured with the trigger Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~3.6Vvolts. It is operating at a temperature of -40°C~125°C TA. D-Typeis the type of this D latch. The 74LVCseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 150MHz. As a result, it consumes 10μA quiescent current and is not affected by external forces. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 74LVC74 family. The D flip flop is powered by a voltage of 1.8V . A JK flip flop with a 5pFfarad input capacitance is used here. It is a member of the LVC/LCX/Zfamily of D flip flop. There is an electronic part mounted in the way of Surface Mount. This board has 14 pins. In this device, the clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. It reaches the maximum supply voltage (Vsup) at 3.6V. 2 circuits are used to achieve its superior flexibility. Considering the reliability of this T flip flop, it is well suited for TR. It operates from 3.3V power supplies. With an output current of 24mA, it is possible to design the device in any way you want. There are no output lines on the JK flip flop.

SN74LVC74APWT Features

Tape & Reel (TR) package
74LVC series
14 pins
3.3V power supplies

SN74LVC74APWT Applications

There are a lot of Texas Instruments SN74LVC74APWT Flip Flops applications.

• Circuit Design
• Data Synchronizers
• EMI reduction circuitry
• Divide a clock signal by 2 or 4
• Frequency Divider circuits
• Set-reset capability
• Cold spare funcion
• QML qualified product
• Shift Registers
• Dynamic threshold performance