MM74HC175M Overview

The package is in the form of 16-SOIC (0.154, 3.90mm Width). The package Tubecontains it. This output is configured with Differential. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. A voltage of 2V~6Vis required for its operation. Currently, the operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74HCseries FPGA. In order for it to function properly, its output frequency should not exceed 70MHz. A total of 1 elements are present. 16terminations have occurred. JK flip flop belongs to 74HC175 family. It is powered by a voltage of 5V . A JK flip flop with a 5pFfarad input capacitance is used here. An electronic device belonging to the family HC/UHcan be found here. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. An electronic part designed with 4bits is used in this application. Vsup reaches 6V, the maximal supply voltage. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. The power supply is 2/6V. The output current of 5.2mA makes it feature maximum design flexibility. In order to operate, the chip has 4 output lines. In terms of quiescent current, it consumes 8μA . The number of channels is growing strong/weak: 4.

MM74HC175M Features

Tube package
74HC series
16 pins
4 Bits
2/6V power supplies

MM74HC175M Applications

There are a lot of ON Semiconductor MM74HC175M Flip Flops applications.

• Memory
• Functionally equivalent to the MC10/100EL29
• Shift Registers
• ESD performance
• Modulo – n – counter
• Registers
• Frequency Divider circuits
• Set-reset capability
• 2 – Bit synchronous counter
• High Performance Logic for test systems