MM74HC273MTCX Overview

The package is in the form of 20-TSSOP (0.173, 4.40mm Width). D flip flop is embedded in the Tape & Reel (TR) package. There is a Non-Invertedoutput configured with it. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74HCseries contain this type of chip. A frequency of 78MHzshould be the maximum output frequency. The element count is 1 . During its operation, it consumes 8μA quiescent energy. A total of 20 terminations have been made. Members of the 74HC273family make up this object. A voltage of 4.5V is used to power it. A JK flip flop with a 7pFfarad input capacitance is used here. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. This electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. Flip flops designed with 8bits are used in this part. 6Vis the maximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 2V. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. The D latch operates on 2/6V volts. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It is of 8 channels.

MM74HC273MTCX Features

Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies

MM74HC273MTCX Applications

There are a lot of ON Semiconductor MM74HC273MTCX Flip Flops applications.

• Buffer registers
• Single Up Count-Control Line
• Registers
• ESCC
• Memory
• Reduced system switching noise
• Control circuits
• Instrumentation
• Pattern generators
• Shift registers