MM74HC74AMX Overview

14-SOIC (0.154, 3.90mm Width)is the packaging method. D flip flop is included in the Tape & Reel (TR)package. T flip flop uses Differentialas its output configuration. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. Temperature is set to -40°C~85°C TA. It is an electronic flip flop with the type D-Type. JK flip flop is a part of the 74HCseries of FPGAs. You should not exceed 94MHzin the output frequency of the device. Terminations are 14. D latch belongs to the 74HC74 family. A voltage of 4.5V is used to power it. Its input capacitance is 5pFfarads. A device of this type belongs to the family of HC/UH. In this case, the electronic component is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. This T flip flop features a maximum design flexibility due to its output current of 25mA. In order to operate, the chip has 1 output lines. In terms of quiescent current, it consumes 4μA . A total of 2 channels are available.

MM74HC74AMX Features

Tape & Reel (TR) package
74HC series
14 pins

MM74HC74AMX Applications

There are a lot of ON Semiconductor MM74HC74AMX Flip Flops applications.

• Divide a clock signal by 2 or 4
• Digital electronics systems
• Power down protection
• Frequency Dividers
• Shift Registers
• Control circuits
• Individual Asynchronous Resets
• Balanced 24 mA output drivers
• Latch
• Guaranteed simultaneous switching noise level