MM74HC74ASJ Overview

In the form of 14-SOIC (0.209, 5.30mm Width), it has been packaged. As part of the package Tube, it is embedded. The output it is configured with uses Differential. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. This type of FPGA is a part of the 74HC series. It should not exceed 94MHzin terms of its output frequency. Despite external influences, it consumes 4μAof quiescent current. There are 14 terminations,The 74HC74 family contains this object. It is powered from a supply voltage of 5V. There is 5pF input capacitance for this T flip flop. A device of this type belongs to the family of HC/UH. There is an electronic part that is mounted in the way of Surface Mount. A total of 14pins are provided on this board. This device has the clock edge trigger type of Positive Edge. It reaches 6Vwhen the supply voltage is maximal (Vsup). For normal operation, the supply voltage (Vsup) should be above 2V. The superior flexibility is achieved through the use of 2 circuits. The JK flip flop is with 1 output lines to operate.

MM74HC74ASJ Features

Tube package
74HC series
14 pins

MM74HC74ASJ Applications

There are a lot of ON Semiconductor MM74HC74ASJ Flip Flops applications.

• Load Control
• Set-reset capability
• Convert a momentary switch to a toggle switch
• Frequency Divider circuits
• Event Detectors
• Instrumentation
• Buffered Clock
• EMI reduction circuitry
• Storage Registers
• Common Clocks