MM74HCT273N Overview

In the form of 20-DIP (0.300, 7.62mm), it has been packaged. D flip flop is embedded in the Tube package. T flip flop is configured with an output of Non-Inverted. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at a temperature of -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The 74HCTseries comprises this type of FPGA. Its output frequency should not exceed 68MHz. D latch consists of 1 elements. It consumes 8μA of quiescent current without being affected by external factors. The number of terminations is 20. This D latch belongs to the family of 74HCT273. It is powered from a supply voltage of 5V. This JK flip flop has a 6pFfarad input capacitance. The electronic device belongs to the HCTfamily. There is an electronic part that is mounted in the way of Through Hole. With its 20pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. An electronic part designed with 1bits is used in this application. Its superior flexibility is attributed to its use of 8 circuits. If high efficiency is desired, the supply voltage should be kept at 5V. With an output current of 4.8mA, this device offers maximum design flexibility. In order for the chip to function, it has 8output lines.

MM74HCT273N Features

Tube package
74HCT series
20 pins
1 Bits

MM74HCT273N Applications

There are a lot of ON Semiconductor MM74HCT273N Flip Flops applications.

• ESD protection
• Test & Measurement
• Differential Individual
• 2 – Bit synchronous counter
• Digital electronics systems
• Frequency division
• Communications
• Latch
• Data Synchronizers
• Automotive