MM74HCT273WMX Overview

In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. The package Tape & Reel (TR)contains it. In the configuration, Non-Invertedis used as the output. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 4.5V~5.5V. It is operating at a temperature of -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The 74HCTseries comprises this type of FPGA. A frequency of 68MHzshould not be exceeded by its output. A total of 1 elements are present. As a result, it consumes 8μA of quiescent current without being affected by external factors. It has been determined that there have been 20 terminations. The 74HCT273 family contains it. The power supply voltage is 5V. There is 6pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as HCT. This electronic part is mounted in the way of Surface Mount. There are 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. 8bits are used in its design. Its flexibility is enhanced by 8 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. It runs on 5Vvolts of power. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It offers maximum design flexibility with its output current of 25mA.

MM74HCT273WMX Features

Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies

MM74HCT273WMX Applications

There are a lot of ON Semiconductor MM74HCT273WMX Flip Flops applications.

• Memory
• Shift Registers
• Dynamic threshold performance
• Synchronous counter
• Convert a momentary switch to a toggle switch
• Parallel data storage
• Asynchronous counter
• Single Down Count-Control Line
• Divide a clock signal by 2 or 4
• ESD protection